在安装宝塔面板之前,需要先刷入 Armbian,然后再安装宝塔面板。

教程

将宝塔面板7.3安装脚本上传到 root 目录,然后运行以下命令

root@aml:~# bash install.sh

然后会输出一句话

Do you want to install Bt-Panel to the /www directory now?(y/n): 

输入 y 同意安装

然后脚本会开始安装宝塔面板,时间较长,大概要一个小时,中间可能会有停顿,等待即可。安装完成后,会输出用户名和密码。
打开浏览器,输入面板地址进入面板(输出的面板地址中的IP是外网IP,需要将其替换成玩客云内网IP)
登录之后同意许可协议即可。

宝塔面板安装脚本

#!/bin/bash
PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin:~/bin
export PATH
LANG=en_US.UTF-8

setup_path="/www"

if [ "$1" ];then
    IDC_CODE=$1
fi

Red_Error(){
    echo '=================================================';
    printf '\033[1;31;40m%b\033[0m\n' "$1";
    exit 0;
}


isPy26=$(python -V 2>&1|grep '2.6.')
if [ "${isPy26}" ];then
    Red_Error "抱歉, 7.x不支持Centos6.x,请安装Centos7或安装宝塔5.9";
fi
Lock_Clear(){
    if [ -f "/etc/bt_crack.pl" ];then
        chattr -R -ia /www
        chattr -ia /etc/init.d/bt
        \cp -rpa /www/backup/panel/vhost/* /www/server/panel/vhost/
        mv /www/server/panel/BTPanel/__init__.bak /www/server/panel/BTPanel/__init__.py
        rm -f /etc/bt_crack.pl
    fi
}
Install_Check(){
    while [ "$yes" != 'yes' ] && [ "$yes" != 'n' ]
    do
        echo -e "----------------------------------------------------"
        echo -e "已有Web环境,安装宝塔可能影响现有站点"
        echo -e "Web service is alreday installed,Can't install panel"
        echo -e "----------------------------------------------------"
        read -p "输入yes强制安装/Enter yes to force installation (yes/n): " yes;
    done 
    if [ "$yes" == 'n' ];then
        exit;
    fi
}
System_Check(){
    for serviceS in nginx httpd mysqld
    do
        if [ -f "/etc/init.d/${serviceS}" ]; then
            if [ "${serviceS}" = "httpd" ]; then
                serviceCheck=$(cat /etc/init.d/${serviceS}|grep /www/server/apache)
            elif [ "${serviceS}" = "mysqld" ]; then
                serviceCheck=$(cat /etc/init.d/${serviceS}|grep /www/server/mysql)
            else
                serviceCheck=$(cat /etc/init.d/${serviceS}|grep /www/server/${serviceS})
            fi
            [ -z "${serviceCheck}" ] && Install_Check
        fi
    done
}
Get_Pack_Manager(){
    if [ -f "/usr/bin/yum" ] && [ -d "/etc/yum.repos.d" ]; then
        PM="yum"
    elif [ -f "/usr/bin/apt-get" ] && [ -f "/usr/bin/dpkg" ]; then
        PM="apt-get"
    fi
}

Auto_Swap()
{
    swap=$(free |grep Swap|awk '{print $2}')
    if [ "${swap}" -gt 1 ];then
        echo "Swap total sizse: $swap";
        return;
    fi
    if [ ! -d /www ];then
        mkdir /www
    fi
    swapFile="/www/swap"
    dd if=/dev/zero of=$swapFile bs=1M count=1025
    mkswap -f $swapFile
    swapon $swapFile
    echo "$swapFile    swap    swap    defaults    0 0" >> /etc/fstab
    swap=`free |grep Swap|awk '{print $2}'`
    if [ $swap -gt 1 ];then
        echo "Swap total sizse: $swap";
        return;
    fi

    sed -i "/\/www\/swap/d" /etc/fstab
    rm -f $swapFile
}
Service_Add(){
    if [ "${PM}" == "yum" ] || [ "${PM}" == "dnf" ]; then
        chkconfig --add bt
        chkconfig --level 2345 bt on
    elif [ "${PM}" == "apt-get" ]; then
        update-rc.d bt defaults
    fi 
}

get_node_url(){
    if [ ! -f /bin/curl ];then
        if [ "${PM}" = "yum" ]; then
            yum install curl -y
        elif [ "${PM}" = "apt-get" ]; then
            apt-get install curl -y
        fi
    fi

    echo '---------------------------------------------';
    echo "Selected download node...";
    nodes=(http://dg2.bt.cn http://183.235.223.101:3389 http://dg1.bt.cn http://125.88.182.172:5880 http://103.224.251.67 http://119.188.210.21:5880 http://download.bt.cn http://45.32.116.160 http://128.1.164.196);
    i=1;
    for node in ${nodes[@]};
    do
        start=`date +%s.%N`
        result=`curl -sS --connect-timeout 3 -m 60 $node/check.txt`
        if [ $result = 'True' ];then
            end=`date +%s.%N`
            start_s=`echo $start | cut -d '.' -f 1`
            start_ns=`echo $start | cut -d '.' -f 2`
            end_s=`echo $end | cut -d '.' -f 1`
            end_ns=`echo $end | cut -d '.' -f 2`
            time_micro=$(( (10#$end_s-10#$start_s)*1000000 + (10#$end_ns/1000 - 10#$start_ns/1000) ))
            time_ms=$(($time_micro/1000))
            values[$i]=$time_ms;
            urls[$time_ms]=$node
            i=$(($i+1))
            if [ $time_ms -lt 100 ];then
                break;
            fi
        fi
    done
    j=5000
    for n in ${values[@]};
    do
        if [ $j -gt $n ];then
            j=$n
        fi
        if [ $j -lt 100 ];then
            break;
        fi
    done
    if [ $j = 5000 ];then
        NODE_URL='http://download.bt.cn';
    else
        NODE_URL=${urls[$j]}
    fi
    download_Url=$NODE_URL
    echo "Download node: $download_Url";
    echo '---------------------------------------------';
}
Remove_Package(){
    local PackageNmae=$1
    if [ "${PM}" == "yum" ];then
        isPackage=$(rpm -q ${PackageNmae}|grep "not installed")
        if [ -z "${isPackage}" ];then
            yum remove ${PackageNmae} -y
        fi 
    elif [ "${PM}" == "apt-get" ];then
        isPackage=$(dpkg -l|grep ${PackageNmae})
        if [ "${PackageNmae}" ];then
            apt-get remove ${PackageNmae} -y
        fi
    fi
}
Install_RPM_Pack(){
    yumPath=/etc/yum.conf
    Centos8Check=$(cat /etc/redhat-release | grep ' 8.' | grep -iE 'centos|Red Hat')
    isExc=$(cat $yumPath|grep httpd)
    if [ "$isExc" = "" ];then
        echo "exclude=httpd nginx php mysql mairadb python-psutil python2-psutil" >> $yumPath
    fi

    yumBaseUrl=$(cat /etc/yum.repos.d/CentOS-Base.repo|grep baseurl=http|cut -d '=' -f 2|cut -d '$' -f 1|head -n 1)
    if [ "${yumBaseUrl}" ];then 
        checkYumRepo=$(curl --connect-timeout 5 --head -s -o /dev/null -w "%{http_code} %{time_total}" ${yumBaseUrl})
        yumStatus=$(echo ${checkYumRepo}|awk '{print $1}')
        time_total=$(echo ${checkYumRepo}|awk '{print $2}'|cut -d '.' -f 1)
    fi
    if [ "${yumStatus}" != "200" ] || [ "${time_total}" -ge "2" ];then
        wget -O yumRepo_select.sh http://download.bt.cn/install/5/yumRepo_select.sh
        bash yumRepo_select.sh ${download_Url}
    fi

    #尝试同步时间(从bt.cn)
    echo 'Synchronizing system time...'
    getBtTime=$(curl -sS --connect-timeout 3 -m 60 http://www.bt.cn/api/index/get_time)
    if [ "${getBtTime}" ];then
        date -s "$(date -d @$getBtTime +"%Y-%m-%d %H:%M:%S")"
    fi

    if [ -z "${Centos8Check}" ]; then
        yum install ntp -y
        rm -rf /etc/localtime
        ln -s /usr/share/zoneinfo/Asia/Shanghai /etc/localtime

        #尝试同步国际时间(从ntp服务器)
        ntpdate 0.asia.pool.ntp.org
        setenforce 0
    fi

    startTime=`date +%s`

    sed -i 's/SELINUX=enforcing/SELINUX=disabled/' /etc/selinux/config
    #yum remove -y python-requests python3-requests python-greenlet python3-greenlet
    yumPacks="wget python-devel python-imaging tar zip unzip openssl openssl-devel gcc libxml2 libxml2-devel libxslt* zlib zlib-devel libjpeg-devel libpng-devel libwebp libwebp-devel freetype freetype-devel lsof pcre pcre-devel vixie-cron crontabs icu libicu-devel c-ares"
    yum install -y ${yumPacks}

    for yumPack in ${yumPacks}
    do
        rpmPack=$(rpm -q ${yumPack})
        packCheck=$(echo ${rpmPack}|grep not)
        if [ "${packCheck}" ]; then
            yum install ${yumPack} -y
        fi
    done
    if [ -f "/usr/bin/dnf" ]; then
        dnf install -y redhat-rpm-config
    fi

    yum install epel-release -y

    if [ -z "${Centos8Check}" ];then
        yum install python-devel -y
    else
        yum install python3 python3-devel -y
        ln -sf /usr/bin/python3 /usr/bin/python
    fi
}
Install_Deb_Pack(){
    ln -sf bash /bin/sh
    apt-get update -y
    apt-get install ruby -y
    apt-get install lsb-release -y
    #apt-get install ntp ntpdate -y
    #/etc/init.d/ntp stop
    #update-rc.d ntp remove
    #cat >>~/.profile<<EOF
    #TZ='Asia/Shanghai'; export TZ
    #EOF
    #rm -rf /etc/localtime
    #cp /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
    #echo 'Synchronizing system time...'
    #ntpdate 0.asia.pool.ntp.org
    #apt-get upgrade -y
    for pace in wget curl python python-dev python-imaging zip unzip openssl libssl-dev gcc libxml2 libxml2-dev libxslt zlib1g zlib1g-dev libjpeg-dev libpng-dev lsof libpcre3 libpcre3-dev cron;
    do apt-get -y install $pace --force-yes; done
    apt-get -y install python-dev

    tmp=$(python -V 2>&1|awk '{print $2}')
    pVersion=${tmp:0:3}
    if [ "${pVersion}" == '2.7' ];then
        apt-get -y install python2.7-dev
    fi

    if [ ! -d '/etc/letsencrypt' ];then
        mkdir -p /etc/letsencryp
        mkdir -p /var/spool/cron
        if [ ! -f '/var/spool/cron/crontabs/root' ];then
            echo '' > /var/spool/cron/crontabs/root
            chmod 600 /var/spool/cron/crontabs/root
        fi
    fi
}
Install_Bt(){
    panelPort="8888"
    if [ -f ${setup_path}/server/panel/data/port.pl ];then
        panelPort=$(cat ${setup_path}/server/panel/data/port.pl)
    fi
    mkdir -p ${setup_path}/server/panel/logs
    mkdir -p ${setup_path}/server/panel/vhost/apache
    mkdir -p ${setup_path}/server/panel/vhost/nginx
    mkdir -p ${setup_path}/server/panel/vhost/rewrite
    mkdir -p ${setup_path}/server/panel/install
    mkdir -p /www/server
    mkdir -p /www/wwwroot
    mkdir -p /www/wwwlogs
    mkdir -p /www/backup/database
    mkdir -p /www/backup/site

    if [ ! -f "/usr/bin/unzip" ]; then
        if [ "${PM}" = "yum" ]; then
            yum install unzip -y
        elif [ "${PM}" = "apt-get" ]; then
            apt-get install unzip -y
        fi
    fi

    if [ -f "/etc/init.d/bt" ]; then
        /etc/init.d/bt stop
        sleep 1
    fi

    wget -O panel.zip ${download_Url}/install/src/panel6.zip -T 10
    wget -O /etc/init.d/bt ${download_Url}/install/src/bt6.init -T 10
    wget -O /www/server/panel/install/public.sh ${download_Url}/install/public.sh -T 10

    if [ -f "${setup_path}/server/panel/data/default.db" ];then
        if [ -d "/${setup_path}/server/panel/old_data" ];then
            rm -rf ${setup_path}/server/panel/old_data
        fi
        mkdir -p ${setup_path}/server/panel/old_data
        mv -f ${setup_path}/server/panel/data/default.db ${setup_path}/server/panel/old_data/default.db
        mv -f ${setup_path}/server/panel/data/system.db ${setup_path}/server/panel/old_data/system.db
        mv -f ${setup_path}/server/panel/data/port.pl ${setup_path}/server/panel/old_data/port.pl
        mv -f ${setup_path}/server/panel/data/admin_path.pl ${setup_path}/server/panel/old_data/admin_path.pl
    fi

    unzip -o panel.zip -d ${setup_path}/server/ > /dev/null

    if [ -d "${setup_path}/server/panel/old_data" ];then
        mv -f ${setup_path}/server/panel/old_data/default.db ${setup_path}/server/panel/data/default.db
        mv -f ${setup_path}/server/panel/old_data/system.db ${setup_path}/server/panel/data/system.db
        mv -f ${setup_path}/server/panel/old_data/port.pl ${setup_path}/server/panel/data/port.pl
        mv -f ${setup_path}/server/panel/old_data/admin_path.pl ${setup_path}/server/panel/data/admin_path.pl
        if [ -d "/${setup_path}/server/panel/old_data" ];then
            rm -rf ${setup_path}/server/panel/old_data
        fi
    fi

    rm -f panel.zip

    if [ ! -f ${setup_path}/server/panel/tools.py ];then
        Red_Error "ERROR: Failed to download, please try install again!"
    fi

    rm -f ${setup_path}/server/panel/class/*.pyc
    rm -f ${setup_path}/server/panel/*.pyc

    chmod +x /etc/init.d/bt
    chmod -R 600 ${setup_path}/server/panel
    chmod -R +x ${setup_path}/server/panel/script
    ln -sf /etc/init.d/bt /usr/bin/bt
    echo "${panelPort}" > ${setup_path}/server/panel/data/port.pl
}
Install_Pip(){
    curl -Ss --connect-timeout 3 -m 60 http://download.bt.cn/install/pip_select.sh|bash
    isPip=$(pip -V|grep python)
    if [ -z "${isPip}" ];then
        wget -O get-pip.py ${download_Url}/src/get-pip.py
        python get-pip.py
        rm -f get-pip.py
        isPip=$(pip -V|grep python)
        if [ -z "${isPip}" ];then
            if [ "${PM}" = "yum" ]; then
                if [ -z "${Centos8Check}" ];then
                    yum install python-pip -y
                    pip install --upgrade pip
                else
                    yum install python3-pip -y
                    pip3 install --upgrade pip
                fi
            elif [ "${PM}" = "apt-get" ]; then
                apt-get install python-pip -y
                pip install --upgrade pip
            fi
        fi
    fi
    pipVersion=$(pip -V|awk '{print $2}'|cut -d '.' -f 1)
    if [ "${pipVersion}" -lt "9" ];then
        pip install --upgrade pip
    fi
}
Install_Pillow()
{
    isSetup=$(python -m PIL 2>&1|grep package)
    if [ "$isSetup" = "" ];then
        isFedora = `cat /etc/redhat-release |grep Fedora`
        if [ "${isFedora}" ];then
            pip install Pillow
            return;
        fi
        wget -O Pillow-3.2.0.zip $download_Url/install/src/Pillow-3.2.0.zip -T 10
        unzip Pillow-3.2.0.zip
        rm -f Pillow-3.2.0.zip
        cd Pillow-3.2.0
        python setup.py install
        cd ..
        rm -rf Pillow-3.2.0
    fi

    isSetup=$(python -m PIL 2>&1|grep package)
    if [ -z "${isSetup}" ];then
        Red_Error "Pillow installation failed."
    fi
}

Install_psutil()
{
    isSetup=`python -m psutil 2>&1|grep package`
    if [ "$isSetup" = "" ];then
        wget -O psutil-5.2.2.tar.gz $download_Url/install/src/psutil-5.2.2.tar.gz -T 10
        tar xvf psutil-5.2.2.tar.gz
        rm -f psutil-5.2.2.tar.gz
        cd psutil-5.2.2
        python setup.py install
        cd ..
        rm -rf psutil-5.2.2
    fi
    isSetup=$(python -m psutil 2>&1|grep package)
    if [ "${isSetup}" = "" ];then
        Red_Error "Psutil installation failed."
    fi
}
Install_chardet()
{
    isSetup=$(python -m chardet 2>&1|grep package)
    if [ "${isSetup}" = "" ];then
        wget -O chardet-2.3.0.tar.gz $download_Url/install/src/chardet-2.3.0.tar.gz -T 10
        tar xvf chardet-2.3.0.tar.gz
        rm -f chardet-2.3.0.tar.gz
        cd chardet-2.3.0
        python setup.py install
        cd ..
        rm -rf chardet-2.3.0
    fi

    isSetup=$(python -m chardet 2>&1|grep package)
    if [ -z "${isSetup}" ];then
        Red_Error "chardet installation failed."
    fi
}
Install_Python_Lib(){
    isPsutil=$(python -m psutil 2>&1|grep package)
    if [ "${isPsutil}" ];then
        PSUTIL_VERSION=`python -c 'import psutil;print psutil.__version__;' |grep '5.'` 
        if [ -z "${PSUTIL_VERSION}" ];then
            pip uninstall psutil -y 
        fi
    fi

    if [ "${PM}" = "yum" ]; then
        yum install libffi-devel -y
    elif [ "${PM}" = "apt-get" ]; then
        apt install libffi-dev -y
    fi

    pip install setuptools==41.2

    TencentCloudCheck=$(cat /etc/hosts|grep -oE VM_[0-9]+_[0-9]+)
    if [ "${TencentCloudCheck}" ];then
        pip install -I requests
    fi

    python_gevent=$(rpm -qa|grep gevent)
    if [ "$python_gevent" != "" ];then
        yum remove python-gevent -y
        yum remove python-greenlet -y
        pip install greenlet -I
        pip install gevent -I
    fi

    pip install SQLAlchemy==1.3.3
    pip install -r ${setup_path}/server/panel/requirements.txt
    pip install werkzeug==0.16.1
    pip install setuptools==41.2
    pip install greenlet
    pip install gevent
    pip install psutil chardet virtualenv Flask Flask-Session Flask-SocketIO flask-sqlalchemy Pillow gevent-websocket paramiko
    pip install qiniu oss2 upyun cos-python-sdk-v5
    Install_Pillow
    Install_psutil
    Install_chardet
}

Set_Bt_Panel(){
    password=$(cat /dev/urandom | head -n 16 | md5sum | head -c 8)
    sleep 1
    admin_auth="/www/server/panel/data/admin_path.pl"
    if [ ! -f ${admin_auth} ];then
        auth_path=$(cat /dev/urandom | head -n 16 | md5sum | head -c 8)
        echo "/${auth_path}" > ${admin_auth}
    fi
    auth_path=$(cat ${admin_auth})
    cd ${setup_path}/server/panel/
    /etc/init.d/bt start
    python -m py_compile tools.py
    python tools.py username
    username=$(python tools.py panel ${password})
    cd ~
    echo "${password}" > ${setup_path}/server/panel/default.pl
    chmod 600 ${setup_path}/server/panel/default.pl
    /etc/init.d/bt restart
    sleep 3
    isStart=$(ps aux |grep 'BT-Panel'|grep -v grep|awk '{print $2}')
    if [ -z "${isStart}" ];then
        Red_Error "ERROR: The BT-Panel service startup failed."
    fi
}
Set_Firewall(){
    sshPort=$(cat /etc/ssh/sshd_config | grep 'Port '|awk '{print $2}')
    if [ "${PM}" = "apt-get" ]; then
        apt-get install -y ufw
        if [ -f "/usr/sbin/ufw" ];then
            ufw allow 888,20,21,22,80,${panelPort},${sshPort}/tcp
            ufw allow 39000:40000/tcp
            ufw_status=`ufw status`
            echo y|ufw enable
            ufw default deny
            ufw reload
        fi
    else
        if [ -f "/etc/init.d/iptables" ];then
            iptables -I INPUT -p tcp -m state --state NEW -m tcp --dport 20 -j ACCEPT
            iptables -I INPUT -p tcp -m state --state NEW -m tcp --dport 21 -j ACCEPT
            iptables -I INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT
            iptables -I INPUT -p tcp -m state --state NEW -m tcp --dport 80 -j ACCEPT
            iptables -I INPUT -p tcp -m state --state NEW -m tcp --dport ${panelPort} -j ACCEPT
            iptables -I INPUT -p tcp -m state --state NEW -m tcp --dport ${sshPort} -j ACCEPT
            iptables -I INPUT -p tcp -m state --state NEW -m tcp --dport 39000:40000 -j ACCEPT
            #iptables -I INPUT -p tcp -m state --state NEW -m udp --dport 39000:40000 -j ACCEPT
            iptables -A INPUT -p icmp --icmp-type any -j ACCEPT
            iptables -A INPUT -s localhost -d localhost -j ACCEPT
            iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
            iptables -P INPUT DROP
            service iptables save
            sed -i "s#IPTABLES_MODULES=\"\"#IPTABLES_MODULES=\"ip_conntrack_netbios_ns ip_conntrack_ftp ip_nat_ftp\"#" /etc/sysconfig/iptables-config
            iptables_status=$(service iptables status | grep 'not running')
            if [ "${iptables_status}" == '' ];then
                service iptables restart
            fi
        else
            AliyunCheck=$(cat /etc/redhat-release|grep "Aliyun Linux")
            [ "${AliyunCheck}" ] && return
            yum install firewalld -y
            [ "${Centos8Check}" ] && yum reinstall python3-six -y
            systemctl enable firewalld
            systemctl start firewalld
            firewall-cmd --set-default-zone=public > /dev/null 2>&1
            firewall-cmd --permanent --zone=public --add-port=20/tcp > /dev/null 2>&1
            firewall-cmd --permanent --zone=public --add-port=21/tcp > /dev/null 2>&1
            firewall-cmd --permanent --zone=public --add-port=22/tcp > /dev/null 2>&1
            firewall-cmd --permanent --zone=public --add-port=80/tcp > /dev/null 2>&1
            firewall-cmd --permanent --zone=public --add-port=${panelPort}/tcp > /dev/null 2>&1
            firewall-cmd --permanent --zone=public --add-port=${sshPort}/tcp > /dev/null 2>&1
            firewall-cmd --permanent --zone=public --add-port=39000-40000/tcp > /dev/null 2>&1
            #firewall-cmd --permanent --zone=public --add-port=39000-40000/udp > /dev/null 2>&1
            firewall-cmd --reload
        fi
    fi
}
Get_Ip_Address(){
    getIpAddress=""
    getIpAddress=$(curl -sS --connect-timeout 10 -m 60 https://www.bt.cn/Api/getIpAddress)
    if [ -z "${getIpAddress}" ] || [ "${getIpAddress}" = "0.0.0.0" ]; then
        isHosts=$(cat /etc/hosts|grep 'www.bt.cn')
        if [ -z "${isHosts}" ];then
            echo "" >> /etc/hosts
            echo "103.224.251.67 www.bt.cn" >> /etc/hosts
            getIpAddress=$(curl -sS --connect-timeout 10 -m 60 https://www.bt.cn/Api/getIpAddress)
            if [ -z "${getIpAddress}" ];then
                sed -i "/bt.cn/d" /etc/hosts
            fi
        fi
    fi

    ipv4Check=$(python -c "import re; print(re.match('^(?:[0-9]{1,3}\.){3}[0-9]{1,3}$','${getIpAddress}'))")
    if [ "${ipv4Check}" == "None" ];then
        ipv6Address=$(echo ${getIpAddress}|tr -d "[]")
        ipv6Check=$(python -c "import re; print(re.match('^([0-9a-fA-F]{0,4}:){1,7}[0-9a-fA-F]{0,4}$','${ipv6Address}'))")
        if [ "${ipv6Check}" == "None" ]; then
            getIpAddress="SERVER_IP"
        else
            echo "True" > ${setup_path}/server/panel/data/ipv6.pl
            sleep 1
            /etc/init.d/bt restart
        fi
    fi

    if [ "${getIpAddress}" != "SERVER_IP" ];then
        echo "${getIpAddress}" > ${setup_path}/server/panel/data/iplist.txt
    fi
}
Setup_Count(){
    curl -sS --connect-timeout 10 -m 60 https://www.bt.cn/Api/SetupCount?type=Linux\&o=$1 > /dev/null 2>&1
    if [ "$1" != "" ];then
        echo $1 > /www/server/panel/data/o.pl
        cd /www/server/panel
        python tools.py o
    fi
    echo /www > /var/bt_setupPath.conf
}

Install_Main(){
    Lock_Clear
    System_Check
    Get_Pack_Manager
    get_node_url

    MEM_TOTAL=$(free -g|grep Mem|awk '{print $2}')
    if [ "${MEM_TOTAL}" -le "1" ];then
        Auto_Swap
    fi

    startTime=`date +%s`
    if [ "${PM}" = "yum" ]; then
        Install_RPM_Pack
    elif [ "${PM}" = "apt-get" ]; then
        Install_Deb_Pack
    fi

    Install_Bt

    Install_Pip
    Install_Python_Lib

    Set_Bt_Panel
    Service_Add
    Set_Firewall

    Get_Ip_Address
    Setup_Count ${IDC_CODE}
}

echo "
+----------------------------------------------------------------------
| Bt-WebPanel 7.0 FOR CentOS/Ubuntu/Debian
+----------------------------------------------------------------------
| Copyright © 2015-2099 BT-SOFT(http://www.bt.cn) All rights reserved.
+----------------------------------------------------------------------
| The WebPanel URL will be http://SERVER_IP:8888 when installed.
+----------------------------------------------------------------------
"
while [ "$go" != 'y' ] && [ "$go" != 'n' ]
do
    read -p "Do you want to install Bt-Panel to the $setup_path directory now?(y/n): " go;
done

if [ "$go" == 'n' ];then
    exit;
fi

Install_Main

echo -e "=================================================================="
echo -e "\033[32mCongratulations! Installed successfully!\033[0m"
echo -e "=================================================================="
echo  "Bt-Panel: http://${getIpAddress}:${panelPort}$auth_path"
echo -e "username: $username"
echo -e "password: $password"
echo -e "\033[33mWarning:\033[0m"
echo -e "\033[33mIf you cannot access the panel, \033[0m"
echo -e "\033[33mrelease the following port (8888|888|80|443|20|21) in the security group\033[0m"
echo -e "=================================================================="

endTime=`date +%s`
((outTime=($endTime-$startTime)/60))
echo -e "Time consumed:\033[32m $outTime \033[0mMinute!"
rm -f new_install.sh


新建 .txt 文件,将脚本内容粘贴进去,然后把这个文件重命名为 install.sh 即可
或者移步百度网盘下载:https://pan.baidu.com/s/1fWTdG7myfllwoF64A5Iahw 提取码:wpyh

[alt type="info"]相关内容来源于网络,本站进行二次整合[/alt]

最后修改:2021 年 12 月 25 日 12 : 56 PM
如果觉得我的文章对你有用,请随意赞赏